24 Cause Damage to Computers and How to Overcome It

here step by step face and How to Prevent: 
1. Computers Do not Want to LiveThe fix:- Check the cable connection (from the power outlet to the power button on the PC)- Check that the stabilizer function or tdak (if using the stabilizer)- Check the power cable on the CPU- If you still do not want to live The issue may lie in the power supply or MB

2. Computers Want But Do not Want Boot LifeThe fix:Recognize First Beep Beep:Beep 1 time only sign that a good condition computerBeep 1 time, There is a problem in the long memoryBeep 1 time long and short 3 times damage on VGA cardBeep 1 time long and 2 short times Damage in DRAM parityDamage continuous beep dimodul memory or video memory- Checks dianosa using software such as SiSoft Sandra, PC mark04, mark05 PC etc.

3. Want Computer Booting But Always "Safe Mode" (to go into safe mode press F8)The fix:- Restart your computer- If still trouble re intall your windows- If it is still safe mode also, means the HD is in troublecheck with: scan disk

4. Computer Hangs FrequentlyHow to Overcome- Caused software crashes- Press ctrl + alt + del >> click End Task on the program "Not Responding"- Press the restart button on the CPU- Caused hardware conflict (the addition of new hardware)- Hardware conflicts often occur in windows operating system- Re-install your windows, but to keep in mind before you reinstall Windows, you first remove the new hardware- Alankan facility "add new" hardware found on the control panel.

5. Keyboard Not Recognized By ComputerHow to Overcome- Check whether your keyboard is properly installed- If it already but still the keyboard is not detected then the keyboard is in trouble.- Try changing your keyboard, if it is replaced but the problem persists then it is most likely damaged at the keyboard port on your MB.
  - If it's been in New Keyboard Replace but remain undetected Also Try Switch with USB Keyboard and undetectable Also if something is wrong and Friends In Windows system.

6. Mouse Not Recognized By Computer (together with keyboard case)

7. Mouse Pointer Always-Skip Hop
How to Overcome
- Clean the mouse immediately dirty (especially the mouse ball)

8. Computer Frequently Crash
The fix:
- Check all the cables, hardware, and also stress on the casing, check the temperature of the CPU and likewise check ram, processor and vga.

9. When manufacturers MetherBoard (MB) Unknown
The fix:
- Open the casing, and check your CPU usually a MB has a manufacturer's label that also contains specifications Mbnya type.
- Look in the manual book
- Find Mb of data over the Internet, skewer ID printed on the sticker board primarily to the list located on the site www.fcc.gov / oet / fccid, and find a list ID number issued by the licensing agency for electronic devices in America
- Use analysis software, such as sandra99 etc..

  10. Forgot BIOS Password
The fix:
- Unplug the cpu cmos Batterey
- Or by emncoba bberapa guess the default password for multiple manufacturers eg AMI and AWARD bios (example: AMI, AMI, AMI_SW, ALLY, 589 589 etc)

11. Clock and date settings BIOS Always Changed-Fox
The fix:
- Batteray cmos is not working (dead), replace with a new batteray

12. Adding New Hardware Device, Tp Not Detected By BIOS
The fix:
- Most likely your bios is outdated that it can not detect the new hardware, then immediately update the bios you can download over the internet.

13. Damage track Card In MB
The fix:
- Denganmencabut try and stick a card on your MB
- If the boot is successful then your card is not problematic so likewise the opposite

14. New Tp Put Processor Not Detected
The fix:
- Check whether you have installed the processor correctly denan
- Check whether the position of the jumper on the processor are correct about the jumper on the processor you can check the manual book.

15. Crash After Installing New RAMThe fix:- The possibility that you plug the ram is not compatible with your computer (unplug the ram)16. Adding RAM But Not DetectedThe fix:- Make checks such as when the case before- Make sure the slot yan appropriate use, for example: SD RAM has a slot similar to RAM but RD RD RAM, can not be detected although it could be installed on SD RAM slot types.17. After Adding RAM process is widened More Slow ComputerThe fix:- Look at your ram capacity limit, eg type of EDO ram maximum limit is 64 MB, so when forced to plus then your computer becomes increasingly slow18. Virtual RamThe fix:- Right-click the My Computer icon, select properties, then select the Performance tab and click VIRTUAL MEMORY- Select an item let me specify my own virtual memory settings (select the HD to be used as virtual memory)- Clock OK19. Monitor Do not Want to liveThe fix:- Make sure all power cables and connectors associated with the monitor ok- Make sure the pin is also available at the entrance to the VGA port is not perfect there are crooked moreover do not go all / any of the pins to the VGA port- Make sure your VGA card is also ok20. Being Dark Current Monitor Loading WindowsThe fix:- Probably due to monitor driver setup is not right (too high frequency setting)- Go first to the conditions of safe mode (press F8)- Re-install VGA driver21. Suddenly Display Corrupt And Computer widened HangThe fix:- Due to the temperature (in VA card) very hot22. No monitor display size as you wishThe fix:- Go to the display properties (right click select properties anywhere)- Tap the settings tab and adjust the size of the display and in accordance with the wishes (at screean area)23. Currently Used As Flashing MonitorThe fix:- Go to the display properties (click kana semabrang place select properties)- Tap the settings tab and click advanced, then click the adapter, in this section display the desired refresh raet24. New Sound Card Not DetectedThe fix:- Crash with the old card saounda- Check the manual book, whether soundcard on boardnya need to be turned off or not if you want to re-install a new soundcard yan (usually can be turned off via jumper or bios)